PET heat shrinkable plastic tube

This product is 125℃ environment protecting plastic tube. It’s strong point is able to bear hot, cold, not easy to broken and hard to shrink again after first shrink. comply with the related hazardous substances control regulations, such as RoHS 2.0, Sony SS-00259, REACH SVHC and halogen-free etc. No crack happened after put it in oven 250℃ and remain for 30 seconds or put it in constant temperature and humidity machine -40℃ and remain for 60 minutes.

    

PET tube performance table

No.

Item

Test method

Unit

Performance

1

structural molecular formula

2

appearance

no contaminate matter included

3

appearance (undissolved partical)

mm2

≤0.7

4

camber(280mm)

mm

8Φ以下(under 8Φ)<3.0

10Φ以上(above 10Φ)<3.5

5

density

ASTMD792

g/cm3

1.2~1.4

6

tensile strength

ASTM D638

N/m2

>107

7

break elongation

ASTMD638

%

>62%

8

water absorption

ASTMD570

%

<2.0%

9

dielectric strength

ASTMD149

KV/mm

>15

10

surface resistivity

ASTMD257

Ω

>109

11

volume resistivity

ASTMD257

Ω·cm

>1014

                      

PET tube specification and performance table

Dia.

Flat width(mm)

Thickness(mm)

Lateral shrink ratio(%)

Longitudinal shrink ratio(%)

Ф3

5.6±0.2

0.08±0.015

48±4

8±3

Ф4

7.1±0.2

0.08±0.015

``

``

Ф5

9.0±0.2

0.08±0.015

``

``

Ф6

10.6±0.2

0.08±0.015

``

``

Ф6.3

11.0±0.2

0.08±0.015

``

``

Ф8

13.9±0.2

0.10±0.02

``

``

Ф10

16.9±0.3

0.10±0.02

``

``

Ф12

20.2±0.3

0.10±0.02

45±4

``

Ф12.5

21.1±0.3

0.10±0.02

``

``

Ф13

21.7±0.3

0.10±0.02

``

``

Ф14.5

24.1±0.3

0.10±0.02

``

``

Ф16

26.7±0.3

0.11±0.02

``

``

Ф18

29.8±0.3

0.11±0.02

``

``

Ф20

32.9±0.3

0.11±0.02

``

``

Ф22

36.2±0.3

0.11±0.02

``

``

Ф25

41.1±0.5

0.11±0.02

``

``

Ф30

49.1±0.5

0.11±0.02

``

``

Ф35

56.7±0.5

0.11±0.02

``

``

Ф40

64.0±1.5

0.13±0.03

40±5

15±5

Ф45

72±1.5

0.20±0.03

``

``

Ф50

84.0±1.0

0.20±0.03

``

``

Ф63.5

106.0±1.5

0.20±0.03

``

``

Ф70

114.0±1.5

0.20±0.03

``

``

Ф76

125.0±1.5

0.20±0.03

``

``

Ф89

145.0±1.5

0.20±0.03

``

``

Ф100

156.0±1.5

0.20±0.03

``

``

Remark: Special criteria is decided on the fact.

Caution: Please store the product below 30℃ condition, avoid the sunshine directly or close to the heat source.

Copyright © 2017-2018 YunLin Plastic(ShenZhen)Co.,Ltd. All right reserved     粤ICP备20071274号